Gradation of microcapsule wall porosity by deposition of polymer mixtures (eudragit RL and eudragit RS). Phase separation of polymer mixtures and effects of external media and conditions on release

M. Donbrow*, A. Hoffman, S. Benita

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

3 Scopus citations

Abstract

With the aim of increasing flexibility in controlling release from microcapsules, mixtures of wall polymers varying in porosity were investigated by phase separation. Eudragit RL and RS (polymethylmethacrylate linear backbone polymers) mixtures differing in polar substituent content and porosity were used as the wall material and were deposited using a non-solvent addition method. Release rates increased with polar group content of the mixtures, using theophylline, potassium dichromate or sodium chloride as model core materials. Theophylline release rate had the same relationship to polar group content as found earlier for urea permeation of cast mixed-polymer films. Release was generally accelerated in these systems when the external medium contained sodium lauryl sulphate as a wetting agent but not consistently, decreasing unexpectedly for RL-theophylline microcapsules. Localized dissolution of core substance was visible microscopically during release from single microcapsules. The release rate was sensitive to agitation intensity only at low wall to core ratios. Temperature change revealed only a single release mechanism for sodium chloride by Arrhenius equation treatment. Buffer ions penetrated coatings readily, changing theophylline release rates and providing clear evidence of diffusion via a pore-capillary mechanism.

Original languageEnglish
Pages (from-to)273-285
Number of pages13
JournalJournal of Microencapsulation
Volume12
Issue number3
DOIs
StatePublished - 1995

Keywords

  • Buffer ion effect on release rate
  • Controlled release
  • Eudragit RL
  • Eudragit RS
  • Graded polymer porosity
  • Ion penetration of polymers
  • Microcapsules
  • Mixed wall polymers
  • Phase separation

Fingerprint

Dive into the research topics of 'Gradation of microcapsule wall porosity by deposition of polymer mixtures (eudragit RL and eudragit RS). Phase separation of polymer mixtures and effects of external media and conditions on release'. Together they form a unique fingerprint.

Cite this