TY - JOUR
T1 - Study of thermal maturation processes of sulfur-rich source rock using compound specific sulfur isotope analysis
AU - Rosenberg, Yoav O.
AU - Meshoulam, Alexander
AU - Said-Ahmad, Ward
AU - Shawar, Lubna
AU - Dror, Guy
AU - Reznik, Itay J.
AU - Feinstein, Shimon
AU - Amrani, Alon
N1 - Publisher Copyright:
© 2017 Elsevier Ltd
PY - 2017/10
Y1 - 2017/10
N2 - Semi-open pyrolysis experiments were conducted on a thermally immature, organic and sulfur-rich source rock (Ghareb Formation, Israel). Structural and sulfur isotope ratio (34S/32S) changes in specific organic sulfur compounds were studied along with bulk sulfur phases (H2S, kerogen, oil) during thermal maturation and oil formation. Oil, gas and rock samples were collected sequentially at several points along the maturation path and were analyzed. In addition, four natural crude oils from Israel were analyzed and the results were compared to the pyrolytic oils. The results showed relatively large δ34S variability (∼10‰) of the organic sulfur compounds (OSCs) in the bitumen of the unheated rock and first pyrolytic oil. This variability was probably a remnant of the original sulfur isotopic signature acquired during the sulfurization of the organic matter in the early diagenetic process. At later stages of thermal maturation, the variability of the sulfur isotopic values in the kerogen gradually decreased to ∼2‰. Three mechanisms were suggested to explain the structural changes and isotopic fractionations of OSCs in the kerogen and generated oils: (A) Cleavage of weak S–S and C–S bonds leading to the release of large amounts of H2S and to cyclization of the precursors in the kerogen with small fractionations. Thus, the OSCs released by this mechanism preserved their distinct δ34S values. (B) Re-reaction of the released S species with hydrocarbons and generation of new OSCs within the kerogen (or bitumen) matrix. (C) Cleavage of stronger C–C bonds and transformation of OSCs to create more stable compounds (e.g. dibenzothiophenes) from multiple sulfur sources. Mechanisms (B) and (C) homogenized the δ34S values of the different OSCs which reflected that of the bulk kerogen. The bulk organic sulfur phases (bitumen, oil, kerogen) were 34S enriched by < 1‰ despite large amounts of 34S-depleted H2S (53% of total S) that was released continuously (“open system”). Therefore, the preferential loss of H2S during thermal maturation may not be responsible to the 34S enrichment of oils as reported in some petroleum basins. The overall outcome of the maturation process yields OSCs with δ34S values that closely reflect the kerogen and can be used as a fingerprint for oil-oil and oil-source rock correlation over wide ranges of thermal maturity. The applicability of such correlation is demonstrated by the very good correlation of δ34S values of specific OSCs between artificial and natural oil samples.
AB - Semi-open pyrolysis experiments were conducted on a thermally immature, organic and sulfur-rich source rock (Ghareb Formation, Israel). Structural and sulfur isotope ratio (34S/32S) changes in specific organic sulfur compounds were studied along with bulk sulfur phases (H2S, kerogen, oil) during thermal maturation and oil formation. Oil, gas and rock samples were collected sequentially at several points along the maturation path and were analyzed. In addition, four natural crude oils from Israel were analyzed and the results were compared to the pyrolytic oils. The results showed relatively large δ34S variability (∼10‰) of the organic sulfur compounds (OSCs) in the bitumen of the unheated rock and first pyrolytic oil. This variability was probably a remnant of the original sulfur isotopic signature acquired during the sulfurization of the organic matter in the early diagenetic process. At later stages of thermal maturation, the variability of the sulfur isotopic values in the kerogen gradually decreased to ∼2‰. Three mechanisms were suggested to explain the structural changes and isotopic fractionations of OSCs in the kerogen and generated oils: (A) Cleavage of weak S–S and C–S bonds leading to the release of large amounts of H2S and to cyclization of the precursors in the kerogen with small fractionations. Thus, the OSCs released by this mechanism preserved their distinct δ34S values. (B) Re-reaction of the released S species with hydrocarbons and generation of new OSCs within the kerogen (or bitumen) matrix. (C) Cleavage of stronger C–C bonds and transformation of OSCs to create more stable compounds (e.g. dibenzothiophenes) from multiple sulfur sources. Mechanisms (B) and (C) homogenized the δ34S values of the different OSCs which reflected that of the bulk kerogen. The bulk organic sulfur phases (bitumen, oil, kerogen) were 34S enriched by < 1‰ despite large amounts of 34S-depleted H2S (53% of total S) that was released continuously (“open system”). Therefore, the preferential loss of H2S during thermal maturation may not be responsible to the 34S enrichment of oils as reported in some petroleum basins. The overall outcome of the maturation process yields OSCs with δ34S values that closely reflect the kerogen and can be used as a fingerprint for oil-oil and oil-source rock correlation over wide ranges of thermal maturity. The applicability of such correlation is demonstrated by the very good correlation of δ34S values of specific OSCs between artificial and natural oil samples.
KW - Compound specific
KW - Oil shale
KW - Pyrolysis
KW - Source rock
KW - Sulfur isotopes
KW - Thermal maturation
KW - Thiophenes
UR - http://www.scopus.com/inward/record.url?scp=85027563852&partnerID=8YFLogxK
U2 - 10.1016/j.orggeochem.2017.06.005
DO - 10.1016/j.orggeochem.2017.06.005
M3 - ???researchoutput.researchoutputtypes.contributiontojournal.article???
AN - SCOPUS:85027563852
SN - 0146-6380
VL - 112
SP - 59
EP - 74
JO - Organic Geochemistry
JF - Organic Geochemistry
ER -